The specimens were manufactured and maintained according to the GB/T 50, standard. HJW60 mixer was used to mix cement, coal gangue powder, tailings powder, and coal gangue manufactured sand for 2 min, and then water was added to stir for 2 min. After mixing evenly, the material was discharged.
Abstract. The main objective of this research was to investigate the effect of coal waste powder as filler material in hot mix asphalt. After sampling the coal waste material from a coal washing plant, it was processed to achieve natural coal waste filler. Furthermore, after incinerating the natural coal waste powder at 750 °C, the coal waste ...
To accurately verify the effect of coal cuttings on waterbased polymer drilling fluids, we add coal powders to the drilling fluid, and measure their performance after mixing the coal powders. Because the large particles below 60 mesh of coal cuttings mixed in the drilling fluid are removed by the solid control device in field drilling ...
Coal waste is a byproduct that produced in coal washing plants. The accumulation of coal waste in the nature causes several ecological and environmental problems. The main objective of this study was to investigate the applicability of coal waste powder and its produced ash as fillers in hot mix asphalt (HMA) compared to the conventional fillers.
The effects of particle size, oil shale content, dust concentration, dispersion pressure and inert dust on the minimum ignition temperature (MIT) of coal and oil shale mixed dust clouds (COSMD) were investigated in a dust cloud MIT testing system to understand the intrinsic mechanisms of these factors affecting the MIT of COSMD. The results demonstrated that 1) COSMD with larger particle size ...
The present review paper summarizes the uptodate research advancements made in the use of mixed reagent systems to improve the separation efficiency of coal flotation. Experimental and molecular dynamics simulation approaches have been adopted to enhance floatability, and reagent adsorptions are also discussed.
DOI: / Corpus ID: ; Synergistic effects of mixing waste activated carbon and coal in coslurrying and CO2 cogasification article{Wang2021SynergisticEO, title={Synergistic effects of mixing waste activated carbon and coal in coslurrying and CO2 cogasification}, author={Jianbin Wang and Jian Chen and Jianzhong Liu and He Liu and Mingxia Wang and Jun Cheng ...
Of the different additives, the viscosity reduction effect of Tween 80 in the waste oilcoalwater slurry was best. Further, the comprehensive performance of the waste oilcoalwater slurry, including slurry ability, stability and fluidity, was found to be best at a water content of 10% and a Tween 80 content of 5%.
Coal flotation is a complex process involving several phases (particles, oil droplets and air bubbles). These phases simultaneously interact with each other and with other species such as the molecules of a promoting reagent and dissolved ions in water. The physical and chemical interactions determine the outcome of the flotation process.
Moreover, Yi et al. [6] used bio oil from biomass pyrolysis to prepare coal water slurry to confirm that the coal water slurry changed from weak to strong pseudoplastic fluid with the increase in the water content of bio oil. Zhang et al. [7] prepared coal water slurry by using waste engine oil and proposed that the possible stabilization ...
Over the years, the federal government has sold leases in the Powder River Basin for about per ton of coal or less. The market price of Powder River Basin coal is about a ton ...
The pulping steps were as follows [22]: (1) measure out the weights of coal powder, additives, and liquids (deionized water and waste oil) required to make up the slurry; (2) pour the additives and liquids into a stirring tank with a capacity of 200 mL and adjust the speed of the mixer to 400500 r/min to fully dissolve the additives; (3) add ...
In this study, a microemulsion was prepared by mixing dodecyl trimethylammonium bromide (DTAB) and diesel oil; its effect on lowrank coal flotation was studied via water contact angle and wrap angle measurements. The results show that the clean coal could not be effectively recovered using a single reagent of DTAB or diesel oil.
This study investigated if whole wheat flourbased cookie dough's physical properties were affected by mixing time (1 to 10 min). The cookie dough quality was assessed using texture (spreadability and stress relaxation), moisture content, and impedance analysis. The distributed components were better organized in dough mixed for 3 min when compared with the other times. The segmentation ...
A study by Xu et al. (2019) examined the effects of coal waste as filler on the functional characteristics of asphalt mastics and mixtures. The study investigated the effects of coal waste on asphalt mastics and mixtures considering various fractions of mass (20 %, 40 %, 60 %, 80 %) for fine limestone powder replacement as a filler.
At the Second CoalOil Mixtures Conference, in Danvers, MA, 1979, it was proposed, possibly seriously for the first time, that coaloil slurries should be produced by wet grinding of the coal in oil rather than dry grinding followed by mixing the powder into the oil. Blending powdered coal into fuel oil, typically bunker oil, was, indeed ...
void fraction of the coal powder beds is the porosity of particle bed when the voids of coal particle bed are filled with water. Void fraction of CWS was calculated by the following equation (Henterson,, 1978). ε = V. s V. c (2) V. s. where ε, V. c, V. s . referred to as void fraction, volume of coal, and volume of slurry ...
The preparation of stable waterinoil (W/O) emulsion is critical for the success of production of stable coaloilwater slurry. The present study was undertaken to experimentally investigate the effects of different process variables on emulsion stability. The emulsion was prepared using 100 ml colloid mill with sorbitan monooleate (SM) as ...
Besides, an optimum mix with considerable water resistance was obtained by equal proportions of coal waste and limestone powders, while the CWP and particularly its ash resulted in a more sensitive mix to water [39]. A study by Xu et al. (2019) examined the effects of coal waste as filler on the functional characteristics of asphalt mastics and ...
In this study, the combined effect of chemical composition and spreading velocity of collector on flotation performance of oxidized coal was investigated. Oxidized coal samples were prepared using the H 2 O 2 solution oxidation method. The contents of oxygencontaining groups on the coal surface increased with the oxidation degree by Xray photoelectron spectroscopy (XPS) analysis and the coal ...
In view of the disadvantage that coal waste powder(CWP) can reduce the crack resistance of asphalt mortar at low temperature, silane coupling agent KH550 was used to modify coal waste powder. The surface characteristics and modification mechanism of silane coupling agent modified coal waste powder were characterized by using Scanning Electronic Microscopy (SEM). Five kinds of silane coupling ...
Herein, a method of mixed combustion of meager coal and SCCB in a pulverized coal furnace for disposal of SCCB is proposed, and thermogravimetric mass spectrometry (TGMS) is used to characterize the combustion and gas release characteristics. The effects of the heating rate and mixing ratio on combustion are analyzed as well.
Some collectors are made by mixing the common oily collectors with the surfactants to enhance the flotation of low rank/oxidized coals because the surfactants can improve the dispersion properties of common oil droplets in flotation pulp and the adsorption of oil droplets on the coal particle surface (Çelik, 2004, Chander et al., 1994, Polat ...
As a new type of nozzle, the internal mixing air atomizing nozzle has been widely used in the field of dust reduction via spraying. In this study, the effect of water supply pressure on the atomization characteristics and dustreduction efficiency of the internal mixing air atomizing nozzle was investigated. Firstly, the FLUENT software was used to simulate the flow field inside and outside ...
2) A specific mass of water is poured into a mixing tank, and the speed of the electric mixer (JHS2) is adjusted to 200 r/min, after which additives are added and fully dissolved in the water. 3) The weighed coal powder is added to the mixing tank, and the speed of the mixer is raised to 1000 r/min and kept there for 15 min. 4) The slurry is ...
Activated charcoal is thought to offer several other benefits, including less gas and flatulence, lower cholesterol levels, and improved kidney function. Some people claim that it helps whiten ...
noted, coal characteristics affect almost every area of plant performance and operation, it is necessary to predict, as much as possible, the physical and economic challenges that will arise when switching coals. Coal blending in its simplest form is the mixing of available coals to produce a blend which combusts well to produce heat and/or power.
Abstract. The preparation of coal water slurry (CWS) as a new substitute for oil and the factors affecting the stability of CWS were studied in this paper. Dry method was used to prepare CWS. Dry coal water slurry refers to the preparation of CWS by grinding coal into powder, then adding water and additives, mixing and stirring.
This invention relates to a mixed fuel comprising a coal powder or the like and heavy oil obtained by adding and mixing a dilute aqueous solution of a watersoluble highmolecular compound and a carbonaceous solid fuel powder such as coal powder or the like (hereinafter referred to as "coal powder and the like") to heavy oil so as to disperse the coal powder and the like and water (in very ...
© DZCrusher - كل الحقوق محفوظة
